We select capacity and hydraulic layout after assessing the building and existing system.
A solution for home heating and hot water
An air-to-water heat pump takes energy from outdoor air and transfers it to a water-based heating system. It can supply underfloor heating, radiators and, with an appropriate specification, domestic hot water. Equipment efficiency is not constant: it is affected by outdoor temperature, water supply temperature, building demand and control settings.
Why the kilowatt rating is not the only consideration
Insufficient capacity may not meet demand in the coldest weather, while unjustifiably oversized equipment may cycle more often and operate under unfavourable conditions. Selection takes account of building heat loss, existing heat emitters, hot water use, electrical supply, outdoor unit location and potential noise impact. An older high-temperature radiator system needs a different assessment from new underfloor heating.
Monobloc or split system
Different designs have different requirements for pipework, frost protection, refrigerant circuits and installation. We suggest a suitable option only once we know the plant room location, pipe run length and how the property is used. We also assess the need for backup heating, a water tank, buffer tank and controls.
From enquiry to commissioning
Start with a short question about the heating you are considering and one contact method. If known, you can include the heated area, the current heat source and your intended result. Insulation, hot-water demand, plans or a site visit can be clarified later; files are not needed in the initial form. The proposal should clearly specify the equipment and scope of work. Installation must take account of manufacturer instructions, the hydraulic layout, electrical protection, condensate drainage and service access.
Catalogue information is intended for model comparison. We confirm the final choice according to the specific property and current manufacturer's technical documentation.
Equipment catalogue
Found 15 model groups. Orders are accepted by enquiry.
No models match the selected filters.
SEPARATE SERVICE
Air-to-water installation
Price on request
Installation is ordered separately when it is not included in the selected equipment price. We refine the estimate according to the equipment, pipe run length, mounting location and any additional work required.
The scope of installation depends on the heat pump specification, plant room and existing heating system. Hydraulic connections, electrical work and commissioning are assessed individually.
We do not publish a single installation price; we provide a quotation after assessing the property. Air-to-air standard connection terms do not apply to this system.
A monobloc air-to-water heat pump using natural R290 refrigerant. Designed for home heating, cooling and domestic hot water; the specification is selected according to the building's heat loss.
R290
Monobloc
Operation down to –25 °C
From 42 dB(A)
From 5 325 €
Equipment price shown. Installation is quoted separately.
An R32 monobloc heat pump for renovated and new homes. We select the appropriate capacity, hydraulic components and hot water solution only after assessing the property's needs.
R32
Monobloc
Operation down to –25 °C
Heating and cooling
From 5 782 €
Equipment price shown. Installation is quoted separately.
A monobloc air-to-water heat pump with the main refrigeration and hydraulic components combined in one outdoor unit. Suitable for residential and larger buildings where a simpler installation layout and a wide capacity range are important.
Monobloc
R32
A+++ class
Operation down to –25 °C
From 4 800,07 €
Equipment price shown. Installation is quoted separately.
A complete split set with an outdoor unit and a wall-mounted indoor hydrobox. The hot water tank is selected separately, making it easy to adapt the system to the family's needs, existing plant room and chosen heating system.
Split system
R32
A+++/A++
Separate hot water tank
From 4 307,60 €
Equipment price shown. Installation is quoted separately.
A complete split set with an outdoor unit and a floor-standing indoor unit incorporating a hot water tank. The 6–10 kW models use a 190 l tank; the 12–16 kW models use a 240 l tank.
Split system
Integrated 190 or 240 l tank
R32
A+++/A++
From 6 975,65 €
Equipment price shown. Installation is quoted separately.
A high-temperature R290 air-to-water system with a separate wall-mounted indoor hydrobox. The catalogue includes only complete 6,7 and 16,6 kW sets whose compatible outdoor and indoor units are currently in stock at BRGroup.
Split monobloc system
R290
A+++/A++
9 kW backup electric heater
From 6 968,39 €
Equipment price shown. Installation is quoted separately.
A complete R290 set with an outdoor unit and a floor-standing indoor unit incorporating a 250-litre hot water tank and a 9 kW backup electric heater. Only the currently available 6,7 and 16,6 kW configurations are shown.
Split monobloc system
Integrated 250 l tank
R290
A+++/A++
From 9 467,04 €
Equipment price shown. Installation is quoted separately.
A separate R290 heat pump for domestic hot water. A stainless steel tank, Wi-Fi and LCD controls, anti-legionella and frost protection functions suit homes needing an independent hot water solution.
Domestic hot water only
200 or 300 l tank
R290
Wi-Fi control
From 3 453,10 €
Equipment price shown. Installation is quoted separately.
A flexible air-to-water system for installations with a separately selected hot water tank. The compact wall-mounted hydrobox suits new or modernised homes, while R32 technology provides efficient heating and cooling.
R32
Separate hot water tank
Heating and cooling
App control
Price on request
Equipment price shown. Installation is quoted separately.
A compact floor-standing indoor unit with an integrated stainless steel hot water tank. Factory-connected components simplify installation, save space and provide a combined solution for heating, cooling and hot water.
R32
Integrated 180 l tank
Small footprint
Operation down to –25 °C
Price on request
Equipment price shown. Installation is quoted separately.
A compact split air-to-water system with an integrated 230-litre hot water tank. The floor-standing indoor unit makes efficient use of plant room space, while one system provides space heating, cooling and domestic hot water.
R32
Integrated 230 l tank
A+++/A++
Operation down to –25 °C
Price on request
Equipment price shown. Installation is quoted separately.
A flexible air-to-water system with a separate wall-mounted hydrobox. The hot water tank and hydraulic specification can be selected according to the family's needs, existing heating system and plant room layout.
R32
Split system
A+++/A++
Separate water tank
Price on request
Equipment price shown. Installation is quoted separately.
A monobloc air-to-water heat pump with the main refrigerant circuit components combined in the outdoor unit. A water circuit runs into the building, so refrigerant pipework between outdoor and indoor units is not required.
R32
Monobloc
4,4 or 8 kW
Heating and cooling
Price on request
Equipment price shown. Installation is quoted separately.
An air-to-water system with an integrated 180- or 190-litre hot water tank. A compact solution for home heating, cooling and hot water when a single, tidy indoor unit is preferred.
R32
Integrated 180–190 l tank
4–10 kW
Heating and cooling
Price on request
Equipment price shown. Installation is quoted separately.
A split air-to-water heat pump that lets you select the hot water tank and hydraulic specification to suit the individual home. Suitable for underfloor heating, radiators and cooling.
R32
Separate water tank
4–10 kW
Flexible specification
Price on request
Equipment price shown. Installation is quoted separately.
Property assessment
Describe your property – we will suggest a suitable solution
Briefly describe what you need and choose one contact method for a reply. If photos or other technical information are needed later, we will agree how to provide them when we get in touch.
